WET STRENGTH AGENT

1. Wet strength agent is water-soluble, cationic and thermoset resin. This product is a non-formaldehyde polymer, non-toxic and odourless with a wide range of PH value and suitable for acid, neutral or slightly alkaline papermaking conditions. Wet strength effect is better than the urea-formaldehyde resins and melamine formaldehyde resin. This agent is developing fast with the development of papermaking industry.
2. The related items


Application Method:

After diluting our product with cold water to a concentration of 1% solution, add it to the pulp slurry after the beating. In general, it is better to add diluted solution into the relatively concentrated pulp slurry. There are no special requirements on the adding points, but it is required to choose places that are able to have a full contact and mix with the slurry. Adding dosage is generally 0.3 to 1.0%. Paper prepared by this agent could be basically solidified on the machine. After leaving the plane, the strength will continue to rise. During papermaking process, if the retention aids are used in conjunction, the wet strength will be better.


Packaging and Storage Conditions:

Packaging: 1000 kg IBC drums
Delivery: within 7 days after order confirmation
Storage: Store it in a cool well-ventilated area away from incompatible materials and ignition sources. The storage period is five months.

TECHNICAL INDEX

Appearance

Colorless to amber liquid

Solid content

12.5% min

Viscosity

20-70

PH

3-6